Pro Vice Chancellor

• Attended Webinar on “New Education Policy 2020- A Road Map for Technical Education” delivered by Prof. Sunil Kumar, Vice Chancellor, RGPV, Bhopal, organized by UBA Cell, Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal under TEQIP -3 September 23, 2020.
• Attended Programme on “Leadership: Strategy, Style and Score Card in Educational Institutions” organized by Indian Institute of Management Ahmedabad under TEQIP -3 during September 11 to 13, 2020.
• Attended “Capacity Building Program on Mind Management” organized by Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal under TEQIP -3 during June 24 to 27, 2020.
• Attended Faculty Development Programme on “Capacity Building for Directors & Principals” conducted for Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal organized by Indian Institute of Management Raipur under TEQIP-3 on June 23, 2020.
• Attended the Webinar on “Role of 3D Printing during COVID-19 Pandemic” organized by Department of Mechanical Engineering, Bipin Tripathi Kumaon Institute of Technology, Dwarahat on June 1, 2020.
• Attended One Week Faculty Development Program on “Advanced NDT Techniques & Applications in Industry” organized by Indian Society for Non Destructive Testing, Hyderabad Chapter in association with Department of Mechanical Engineering, QISCET, Ongole during May 25-29, 2020.
• Attended online Workshop on “Universal Human Values” on the theme “Inculcating Universal Human Values in Technical Education” organized by All India Council for Technical Education(AICTE) during 26-30 April, 2020.
• Attended “Capacity Building Programme” conducted for RGPV under TEQIP-III organized by Indian Institute of Management Indore during November 11-13, 2019.
• Attended “NAAC Awareness Programme on Assessment and Accreditation” organized by Internal Quality Assurance Cell, Jiwaji University, Gwalior on August 03, 2018.
• Attended AICTE Sponsored Short Term Course on “Additive Manufacturing” organized by Indian Institute of Technology, Kanpur during February 05 to 09, 2018.
• Attended Workshop on “Methodology for Preparation of High Quality Research Project and Networking among MPCST & University/Colleges” organized by M. P. Council of Science & Technology, Bhopal on January 16, 2018.
• Attended Short Term Course on “Recent Advancement in Product Design, Manufacturing and Maintenance Techniques” organized by PDPM Indian Institute of Information Technology, Design and manufacturing, Jabalpur during September 16 to 20, 2017.
• Attended Short Term Course on “Advances in Manufacturing Systems” organized by Department of Mechanical and Automobile Engineering, Madhav Institute of Technology & Science, Gwalior during February 16 to 22, 2017.
• Attended Short Term Course on “Industrial Engineering Techniques”organized by Department of Mechanical Engineering, Maulana Azad National Institute of TechnologyduringMay 20 to 24, 2014.
• Attended Short Term Course on “Advance Engineering Optimization through Intelligent Techniques” organized by Department of Mechanical Engineering, SardarVallabhbhai National Institute of Technology (SVNIT), Surat duringJanuary 07 to 11, 2013.
• Attended Short Term Course on “Micro-manufacturing” organized by Department of Mechanical Engineering, Indian Institute of Technology Kanpur duringNovember 05 to 10, 2012.
• Attended Short Term Course on “Micro-manufacturing” organized by Department of Mechanical Engineering, Indian Institute of Technology Kanpur during September 02 to 08, 2010.
• Attended Workshop on “Quality Assurance in Technical Education”organized by Madhav Institute of Technology and Science, Gwalior duringFebruary06-07, 2010.
• Attended Short Term Course on “Competency Mapping & Feedback”organized by Department of Humanities and Social Sciences, Indian Institute of Technology Kharagpur during December 14 to 20, 2009.
• Attended Short Term Course on “Educational Leadership”organized by Centre for Educational Technology, Indian Institute of Technology Kharagpur duringSeptember14 to 20, 2009.
• Attended Workshop on “Intellectual Property Rights”organized by ABV- Indian Institute of Information Technology and Management, Gwalior duringMarch 14-15, 2009.
• Attended Short Term Course on “Sustainable Environment Management”organized by Department of Chemistry,Jaipur Engineering College duringFebruary 21-25, 2009.
• Attended Short Term Course on “Recent Trends in Industrial & Production Engineering” organized by Department of Industrial & Production Engineering, Shri G. S. Institute of Technology and Science, Indore during November 10 to 14, 2008.
• Attended Short Term Course on “e-Business”organized by ABV- Indian Institute of Information Technology and Management, Gwalior duringJuly 21-25, 2008.
• Attended Short Term Course on “Micro-machining” organized by Department of Mechanical Engineering, Indian Institute of Technology Bombay during June 2 to 7, 2008.
• Attended Short Term Course on “Rapid Product Development” organized by Department of Mechanical Engineering, Indian Institute of Technology Guwahati duringDecember 11 to 15, 2006.
• On line course work on “Basics of Jigs & Fixtures” from Tooling University, Ohio (U.S.A.) in 2004.
• Attended 21 days summer training program at Bhilai Steel Plant, Bhilai.

• AICTE-ISTE Sponsored Refresher Program on “Learner Oriented Teaching Methods” at IPS College of Technology & Management, Gwalior during February 10-16, 2021 (Coordinator).
• Delivered talk on “Journey of Machine Tools: Conventional to CNC with IOT and Additive Manufacturing” on December 23, 2020 in One week Faculty Development Programme on Fundamentals and Applications of Additive Manufacturing (An Experimental Approach) organized by Rajkiya Engineering College, Mainpuri during December 21 to 25, 2020 under TEQIP-3.
• Organized STTP on “Python for Machine Learning and Applications” at IPS College of Technology & Management, Gwalior in association with Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal under TEQIP -3 during August 24 to 30, 2020 (Coordinator).
• Organized STTP on “Multirate Digital Signal Processing” at IPS College of Technology & Management, Gwalior in association with Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal under TEQIP -3 during August 24 to 30, 2020 (Coordinator).
• Organized Webinar on “Introduction to Stem Cells and their harvesting for 3D Bioprinting” at IPS College of Technology & Management, Gwalior in association with Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal under TEQIP -3 on August 23, 2020 (Coordinator).
• Organized Webinar on “Web Forensics” at IPS College of Technology & Management, Gwalior in association with Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal under TEQIP -3 on August 22, 2020 (Coordinator).
• Delivered talk on “Latest Trends in Industrial Manufacturing System” in One week Faculty Development Programme on Recent Trends in Manufacturing System and Industrial Practices at S. V. Polytechnic College, Bhopal on March 07, 2020.
• A Workshop on “Cost Estimation of Machined Components” during June 10-22, 2019 at IPS College of Technology & Management, Gwalior (Convenor & Keynote Speaker).
• A Workshop on Metrology and NDT at IPS College of Technology & Management during October 19-20, 2016 (Convenor & Keynote Speaker).
• A Workshop on Metrology and NDT at Gayatri Auto Industries during March 12-13, 2016 (Convenor & Keynote Speaker).
• A Short Term Course on SolidWorks during January 27 – February 16, 20016 (Convenor).
• MPCST Sponsored Short Term Course on Additive Manufacturing at IPS College of Technology & Management during February 12-13, 2016 (Convenor).
• An International Conference on Futuristic Trend in Engineering, Science, Humanities, and Technology (FTESHT- 2016) during January 23-24, 2016 (Convenor).
• A Workshop on I.C. Engine Assembling and Dismantling at IPS College of Technology and Management during February 21-23, 2015 (Convenor & Keynote Speaker).
• An International Conference on Learning Community for Global Education Reform during November 18-20, 2011 (Member of Editorial Board).
• A Short Term Course on Gear Manufacturing at ShriRam Institute of Technology and Management during October 08-09, 2010 (Convenor).
• A Short Term Course on Pro-E at ShriRam College of Engineering and Management during July 09-23, 2008 (Convenor).
• A Short Term Course on Auto-CAD at ShriRam College of Engineering and Management during June 21 to July 08, 2008 (Convenor).
• A National Conference on Recent Developments & Futuristic Trends in Mechanical Engineering (NCME- 07) on April 28-29, 2007 (Sponsored by Department of Science & Technology, New Delhi) (Convenor).
• A Workshop on Maintenance & Safety during March 04-10, 2007 (Convenor).

• 2nd International Conference on Computational & Experimental Methods in Mechanical Engineering (ICCEMME-2019) organized by GL Bajaj Institute of Technology and Management, Greater Noida on May 3-5, 2019.
• 2nd International Conference on Advancement in Engineering, Applied Science and Management (ICAEASM-2017) organized by Conference Info in Association with Academic Science at (IIC, Delhi) India International Centre, 40, Max Mueller Marg, New Delhi on July 2, 2017.
• National Conference on Evolving Management Paradigms in Manufacturing and Service Sectors organized by Department of Management, IPS College of Technology & Management, Gwalior (M.P.) on March 16-17, 2017.
• 4th International Conference on Innovative Research in Engineering Science and Management organized by Conference Info and Gwalior Institute of Information Technology (GIIT), Gwalior at GIIT, Gwalior (M.P.) on May 08, 2016.
• International Conference on Advances in Engineering Science and Management organized by T.R. Publication, Agra (U.P.) on November 8, 2015.
• National Workshop on Research Methodology and Applied Statistics organized by Department of Physical Education, Institute of Professional Studies, Gwalior (M.P.) on May 25-31, 2015.
• International Conference on Future Trends in Structural, Civil, Environmental and Mechanical Engineering (FTSCEM-2013) held during July13-14, 2013 at Bangkok, Thailand.
• International Conference on Advances in Manufacturing and Technology Management (ICAMTM-2007) held on January 18-20. 2007 at Parshvanath College of Engineering, Thane.
• International Conference on Manufacturing Science and Technology 2006 held on August 28-30, 2006 at Multi Media University Melaka, Malaysia.
• National Conference on Energy & Environment held at held at Jaipur Engineering College, Jaipur, organized by Department of Mechanical Engineering on November 25-26, 2006.
• National Seminar on Emerging Trends in Communication & Control Technologies held at ShriRam College of Engineering & Management, Banmore on March 25-26, 2006.

International Journal

• Saraswat, Ashish; Premanand S; Sharma, Avadesh and Pandit, PremPrakash (2020). Tensile and Bending Analysis of Composite Material. International Journal of Advance Science and Technology, 29(10S), 6598-6606.
• Kumar, Sumit; Chauhan, Premanand S; Sharma, Avadesh and Agrawal, Anupma (2020). Analysis of Temperature Dependent Creep Behaviour of Aluminium Bar. International Journal of Advance Science and Technology, 29(10S), 6256-6263.
• Tewari, Satosh Kumar; Dubey, Jitendra and Chauhan, Premanand S (2020). Modelling, FEA and optimization of backhoe excavator attachment for maximum machine life. SSRG International journal of mechanical engineering, 7(2), 5-15.
• Tewari, Satosh Kumar and Chauhan, Premanand S (2020). Modelling, FE Analysis and optimization of the components of backhoe: a review. International journal of engineering development and research, 8(1), 278-284.
• Sharma, A. K.; Sharma, P.; Chauhan, Premanand S. and Bhadoria, S. S. (2018). Study on harmonic analysis of functionally graded Plates using FEM. Int. J. of Applied Mechanics and Engineering, 23 (4),941-961.
• Dhakar, Pooran Singh; Chauhan, Premanand S. and and Sengar, Vasudev Singh (2018). Analysis the effect of shape and depth of notch on twisting strength of medium carbon steel 40C8 Bar. Asian journal of innovative research, 10-15.
• Dhakar, Pooran Singh; Chauhan, Premanand S. and and Sengar, Vasudev Singh (2018). Effect of shape of notch on twisting strength of EN 8 material. Asian journal of innovative research, 3(1) 07-12.
• Hasan, Saiyed Javed., Chauhan, Dr. P. S., Bansal, Ashutosh., & Gupta, Adviteeya. (2017). Effect of Shape of Notch on Tensile Strength of EN 8 Material. International Journal of Scientific Research in Science, Engineering and Technology, 3(3), 85-89.
• Chauhan, Dr. P.S. (2017). “Finite element analysis of nodular cast-iron camshaft”. International Journal of Engineering Research and Technology,5(6), 238-242.
• Gupta, Sachin, & Chauhan, Premanand S., (2016). Stress analysis of bevel gear tooth using FEA: A review, International Journal for Scientific Research & Development, 4(2), 1325-1328.
• Gupta, Sachin, Chauhan, Premanand S., & Hussain, J (2016). Stress analysis of bevel gear tooth using FEA, International journal of engineering technology science and research, 3(5), 116-121.
• Bhaduria, Omvir Singh, Goyal Sanjay and Chauhan, Premanand S. (2016). Application of taguchi for optimization of process parameters for minimum surface roughness in turning of 45C8. International Journal of Current Engineering & Scientific Research, 1(3), 47-54.
• Gupta, Adviteeya, Chauhan, Premanand S. and Arya, Prabhu Dayal (2016). Effect of hardness and notch on tensile strength of v-notched SUP 9A BAR. International Journal of Current Engineering & Scientific Research, 1(3), 158-166.
• Sharma, Avadesh K., Chauhan, Premanand S., Narwariya, Manoj and Pankaj, Rajkumar(2016). Vibration Analysis of functionally graded plates with multiple circular cutouts. International Journal of Current Engineering & Scientific Research, 2(3), 15-21.
• Chauhan, Premanand S., Dwivedi, Ravi K. and Sharma Sudhir (2016). Optimization of surface roughness of a drilled hole on SUP 11A by taguchi’s optimization technique. International Journal of Current Engineering & Scientific Research, 2(3), 142-148.
• Gupta, Adviteeya and Chauhan, Premanand S. (2015). Effect of hardness and notch on strength of SUP 9A: a review. International Journal of Science and Engineering, 3 (2), 116-122.
• Narwaria, Uttam S., Chauhan, Premanand S. and Husain, Juber (2015). Finite difference formulation of fin for electronics cooling.International journal of emerging technology and advanced engineering, 5(7), 431-435.
• Narwaria, Uttam S., Chauhan, Premanand S. and Husain, Juber (2015).Finite difference simulation of fin for electronics cooling.European Journal of Advances in Engineering and Technology, 2(9), 34-38.
• Pandit,Prem Prakash and Chauhan, P. S. (2015).Unsteady simulation of rectangular fin for cooling of automobile engine. International research journal of management science and technology, 6 (4), 124-133.
• Pandit, Prem Prakash and Chauhan, P. S. (2015). Numerical study of rectangular fin for cooling of automobile engine.ELK Asia Pacific journal of mechanical engineering research, 1(2), 1-7.
• Chauhan, P. S.and Agrawal, C. M. (2014). Identification of manufacturing defects leading to rejection during manufacturing of stabiliser bar. International journal of productivity and quality management, 14 (4), 408–422.
• Chauhan, P. S., Agrawal, C. M. and Dwivedi, R. K. (2014). Effect of material and process parameter on dimensions of rolled external threads. Applied mechanics and materials journal, 493, 453-460.
• Chauhan, P.S. and Arora, K.C.(2009). Experimental study of effect of surface roughness of blank diameter on external threads.International journal of manufacturing technology and management, 17 (4), 386-395.

International Conference

• Agrawal, S.; Chauhan, P. S. & Pandit, P. P. (2021, June). Design optimisation of air filters using ANSYS fluent; IOP Conf. Series: Materials Science and Engineering 1136, 011001. https://doi.org/10.1088/1757-899X/1136/1/012077
• Iqbal, M. D.; Chauhan, P. S.; Sharma, A. & Pandit, P. P. (2021, June). Creep behaviour analysis of brass bar on variable temperature; IOP Conf. Series: Materials Science and Engineering 1136, 011001. https://doi.org/10.1088/1757-899X/1136/1/012076
• Singh, A.; Chauhan, P. S.; Pandit, P. P. & Narwariya, M. (2021, June). Effect of notch fillet radius on tensile strength of 817M40 notched bar; IOP Conf. Series: Materials Science and Engineering 1136, 011001. https://doi.org/10.1088/1757-899X/1136/1/012070
• Porwal, R. K; K. Vinod; Chauhan, P. S. & Shukla, R. K. (2021, June). An overview to micro-wire-electrical discharge machining; IOP Conf. Series: Materials Science and Engineering 1136, 011001. https://doi.org/10.1088/1757-899X/1136/1/012021
• Soni D., Sharma A.K., Narwariya M., Chauhan P.S. (2021) Effect of Low Weight Fraction of Nano-reinforcement on Tensile Properties of Polymer Nanocomposites. In: Muzammil M., Chandra A., Kankar P.K., Kumar H. (eds) Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-8704-7_90
• Narwariya M., Chauhan P.S., Sharma A.K., Yadav Y.S. (2021) Dynamic Analysis of Isotropic Annular Plate with Eccentric Hole Using Finite Element Method. In: Muzammil M., Chandra A., Kankar P.K., Kumar H. (eds) Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-8704-7_89
• Priyadarshi S., Chauhan P.S., Singh R.P. (2020, October). Design and Analysis of Progressive Die for Manufacturing the Gasket Part. In: Arockiarajan A., Duraiselvam M., Raju R. (eds) Advances in Industrial Automation and Smart Manufacturing. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-4739-3_12
• Narwariya, Manoj; Sharma, Avadesh K, Patidar, Vinod and Chauhan, Premanand S. (2019, May). Harmonic Analysis of Symmetric and Anti-Symmetric Laminated Skew Plate Using Finite Element Method; IOP Conf. Series: Materials Science and Engineering 691, 012007. Doi:10.1088/1757-899X/691/1/012007
• Chauhan, P. S.and Agrawal, C. M. (2013, August). Optimization of blank parameters of rolled threads by Taguchi method; Proceedings of International Conference on Future Trends in Structural, Civil, Environmental and Mechanical Engineering,Bangkok, 94-99.
• Chauhan, P. S.and Arora, K. C. (2006, August). Experimental Study of Effect of Surface Roughness of Blank Diameter on External Threads when Threads are manufactured by Rolling Process on Sup 9A Material; Proceeding of International Conference on Manufacturing Science and Technology, Melaka, Malaysia, 86-89.

National Conference

• “Femto Second Laser Machining” in the proceeding of National Conference on Advances in Mechanical Engineering, held at Kota Engineering College, Kota on 18-19 March, 2006.
• “Silicon Microsystems for Automotive Applications” in the proceedings of National Conference on Emerging Trends in Communication & Control Technologies, held at ShriRamCollege of Engineering &Management, Banmore on 25-26th March, 2006.
• “Thread Rolling Process and Effect of Blank Dimension on External Threads” in the proceeding of National Conference on Advancements & Futuristic Trends in Mechanical & Materials Engineering (AFTMME’06), held on 13th& 14th October, 2006 at GianiZail Singh College of Engineering & Technology, Bathinda, Punjab, India.
• “Alternative Refrigerants for Automobile Air Conditioning” in the proceeding of National Conference on Advancements & Futuristic Trends in Mechanical & Materials Engineering (AFTMME’06), held on 13th& 14th October, 2006 at GianiZail Singh College of Engineering & Technology Bathinda, Punjab, India.
• “Bio Diesel: A Viable Alternative/Supplement to Fossil Fuel” inthe proceeding of National Conference on Energy & Environment (NCEE- 06)that was organized by JaipurEngineering College, Jaipur, India on 25th to 26thNovember, 2006.
• “Vehicular Pollutants and its control by Modern Technology” in the proceeding of National Conference on Energy & Environment (NCEE- 06) that was organized by Jaipur Engineering College, Jaipur, India on 25th to 26th November, 2006.
• “Analysis of Existing Maintenance Procedure of Crawler Crane (A Case Study)” in the proceeding of National Conference on Condition Monitoring (NCCM- 06) that was organized by Condition Monitoring Society of India, Visakhapatnam, India on 15th to 16th December, 2006.
• “Design of Cams for Single Spindle Automatic Lathe for Closing Screw” (ID:PD-69)in the proceeding of National Conference on Recent Developments&Futuristic Trends in Mechanical Engineering (NCME- 07) held at ShriRam College of Engineering & Management, Banmore on 28-29th April, 2007.
• “Design and Analysis of Drill Jig to increase the Productivity of Hollow Stud”(ID:DE-12)in the proceeding of National Conference on Recent Developments&Futuristic Trends in Mechanical Engineering (NCME- 07) held at ShriRam College of Engineering & Management, Banmore on 28-29th April, 2007.
• “Experimental Study of the Influence of a Baffle on the Dynamic Response of a Partially filled Cylindrical Container”(ID:DE-14)in the proceeding of National Conference on Recent Developments&Futuristic Trends in Mechanical Engineering (NCME- 07) held at ShriRam College of Engineering & Management, Banmore on 28-29th April, 2007.
• “Experimental Study of using Different Blends of Bio-Diesel & Diesel and its Effect on the Performance of Diesel Engine” (ID: TH-55) in the proceeding of National Conference on Recent Developments&Futuristic Trends in Mechanical Engineering (NCME- 07) held at ShriRam College of Engineering & Management, Banmore on 28-29th April, 2007.

Proceedings / Books

• Taguchi Approach, Published by LAP LAMBERT Academic Publishing (September 04, 2017), ISBN:978-33-30325-85-2.
• Notch Sensitivity, Published by LAP LAMBERT Academic Publishing (June 14, 2017), ISBN:978-33-30331-65-5.
• Editor of proceedings of International Conference on Futuristic Trend in Engineering, Science, Humanities, and Technology (FTESHT- 2016) Volume-I, II & III, ISBN: 978-93-85225-55-0.

Patents

• Artificial intelligence based method for computer-aided progressive die design. Application no. 201941037055. Date of Filing: 14/09/2019 and Date of Publication: 20/09/2019.
• Vulcanizing fixture machine for tyre and detection method thereof. Application no. 201921052332. Date of Filing: 17/12/2019 and Date of Publication: 20/12/2019.

• Certificate of recognition is awarded by The Academic Council of uLektz as one of the Exemplary Academic Administrators of Higher Education Institutes across India 2019.
• Excellence Award in 2015 for reducing in-process manufacturing non-conformities during Manufacturing of Machined components awarded by Gayatri Auto Industries, Gwalior.
• Certificate of recognition is awarded by The Academic Council of uLektz as one of the Exemplary Academic Administrators of Higher Education Institutes across India 2019.
• Received best project award on Laser Beam Machining project at IITBombay, Mumbai on June 07, 2007.
• Nominated & approved for the Prestigious UDYOGBHARATI AWARD (2005).
• Got M.I.T.S. Gold Medal for being a topper in All Branches of M. Tech.
• Got M.I.T.S. Gold Medal for being a topper in M. Tech Production Engineering.
• Topper of all semester’s examinations of M. Tech.
• Reduced the rejection due to threading of Stabilizer bar at M/s NHK Springs India Ltd.
• Technical Award by Gayatri Auto Industries in 1998 to change the design of collar bolt (Engine component of Eicher Tractor) under continuous improvement program “Kaizen”.
• Got 2^nd position in University in B.E. Examination.
• Got 82% marks in PET Examination.
• Got high position in High School Examination, hence Government of Madhya Pradesh awarded Merit Certificate.
• Taken GRE and TOEFL in 2001and got 800/800 in analytical section of GRE and got admission at Wayne State University, Detroit and University of Louisiana at Lafayette.

S.No.	Candidate’s Name	Topic/Area	Year
1.	Mr. Vivek Kumar	Vibration Based Fault Diagnosis of Rolling Element Bearings	Under Process
2.	Mr. Amit Ojha	Temperature Dependent Creep Behavior Analysis of Copper Bar	Under Process
3.	Mr. Danish Iqbal	Creep Behavior Analysis of Brass Bar on Variable Temperature	2021
4.	Mr. Aditya Singh	Effect of Notch Fillet Radius on Tensile Strength of 817M40 Notched Bar	2021
5.	Mr. Sandeep Agarwal	Design Optimization of Air Filters Using ANSYS Fluent	2021
6.	Mr. Santosh K Tewari	Modelling, FEA and optimization of backhoe excavator attachment for maximum machine life	2020
7.	Mr. Ashish Saraswat	Tensile and Bending Analysis of Composite Material	2020
8.	Mr. Sumit Kumar	Temperature Dependent Creep Behavior Analysis of Aluminum Bar	2020
9.	Mr. Saurabh Priyadarshi	Design and Analysis of Progressive Die for Manufacturing the Gasket Part	2019
10.	Mr. Pooran Singh Dhakar	Analysis of Effect of Shape and Depth of Notch on Twisting Strength of Medium Carbon Steel 40C8 bar	2018
11.	Mr. Neeraj Saraswat	Finite Element Analysis of NCI, GCI & EN18 Materials Camshaft	2017
12.	Mr. Saiyed Javed Hasan	Effect of Shape and Depth of Notch on Tensile Strength of Medium Carbon Steel 40C8	2017
13.	Ms. Adviteeya Gupta	Effect of Notch on Tensile Strength of EN 8 Bar	2016
14.	Mr. Omveer S Bhadoriya	Optimization of Process Parameters in Turning of EN 8	2016
15.	Mr. Sachin Gupta	Stress Analysis of Bevel Gear Tooth Using FEM	2016
16.	Mr. Prem Prakash Pandit	Unsteady Simulation of Rectangular Fin for Cooling of Automobile Engine	2015
17.	Mr. Uttam S Narwariya	Finite Difference Simulation of Fin for Cooling of Heat Generating Devices	2015

Candidate’s Name	Area	Year
Mr. Sudhir Sharma	Production	Under Process

• Difference between Fluids and Solids
• Types of Fluid