Projects
Our Projects
Tri-Copter
Project Structure
The Try-Copter is a three-rotor helicopter with electronic & mechanical structures, RF modules for communication, and an operator interface. It features a rotor, motor, electro-mechanical controller, camera, and body frame.
Latest Technology
The three-rotor design allows easier control, lower power consumption compared to quad-rotors, and maximum lift. Its fixed rotors remove blade movement complexity—movement is controlled purely by motor speed.
Team Members
1. Pavan Joshi | 2. Lucky Padiyar | 3. Ankur Satodia | 4. Pradhuman Arya
Project Guided By: Mr. Vasim Khan
Finger Print Scanner
Project Structure
The basic structure of finger print scanner consist of finger print sensor and the analytical circuit which compared the scanned finger print with the stored finger print of the employs in the database of organization & store the time of arrival and attendance of employee.
Latest Technology
Neurotechnology has released a new line of embedded biometric technology, including Verifinger embedded SDK for fingerprint biometrics, Verilog embedded SDK for face biometrics & Mega matcher embedded SDK for multi-biometric systems using face & fingerprints in combination.
Team Members
1. Sagar Choudhary | 2. Vikas Gupta | 3. Vivek Paliwal | 4. Ashesh Parmar
Project Guided By: Mr. IRSHAD AHAMAD
Alcohol Meter Detector
Project Structure
This project is based on detecting alcohol present in the body of a person or specifically in a driver. The project is implemented with a four wheeler’s ignition system. An alcohol sensor may be fixed to the steering of the vehicle. It senses the alcohol vapors from the mouth of the driver. The amount of alcohol content sensed by detector i.e. the response is converted into the digital value and transferred to microcontroller. The LCD is given to show the alcohol content on the screen. The microcontroller is programmed such that if the alcohol content in driver’s body exceeds precised level .it turns the ignition off through the relay, so that the car won’t start.
Latest Technology
The sensor which we are using in this project is MQ3 which sense alcohol vapors from the mouth of driver & converted the sensed vapours into digital value & transfered it to the microcontroller.
Team Members
1. Kumar Sanket | 2. Lavi Jain | 3. Prabha Mishra
Project Guided By: Mr. Vasim Khan
WIRELESS MOBILE CONTROLLED ROBOT
Project Structure
DTMF Mobile Robo is a machine controlled through a mobile phone. When a call is made to the phone attached to the robot, pressing any key generates a Dual Tone Multi-Frequency (DTMF) tone. The robot receives this tone via the phone, and with the help of a DTMF decoder, the microcontroller processes the signals to control its movement.
Latest Technology
In this project, the robot is controlled by a mobile phone that calls the phone attached to the robot. During the call, pressing any button sends a corresponding dual tone multi-frequency (DTMF) signal to control the robot. DTMF, also known as touch tone, is used for telephone signaling over the voice frequency band. Each key generates a unique combination of two tones, which the electronic circuit easily identifies. The DTMF encoder produces these signals by combining two sine waves of different frequencies in real time.
Team Members
1. RAVIKANT DANDOTIYA | | 2. DHARMESH TIWARI | 3. SWARAJ SOLANKI | 4. ANAND GURJAR
Project Guided By: Mr. PIYUSH DUBEY
SECURITY SYSTEM
Project Structure
The security system will inform you immediately with SMS(text) message your mobile when “unauthorized guest”enters yours premises.System includes GSM module and Passive Infra Red senser(PIR) The entire device is contained within a small plastic enclosure and it looks like simple PIR motion detector.
Latest Technology
The system supports the contact ID protocol which is required to transmit signal to a security satation.All configuration can be programmed using the IR sensor configuration Tool program IR868 version with installed 876MHZ radio transmitter-reciever can operate as an access point wireless devices.
Team Members
1. R.P.ANAND | | 2. PRASHANT KUMAR RANA | 3. SURENDRA SINGH TOMAR
Project Guided By: Prof. JITENDRA SINGH DODIYA
MOBILE CONTROLLED SPY ROBOT USING DTMF TECHNOLOGY
Project Structure
DTMF Mobile Robo is a machine controlled by a mobile phone. When a call is made to the phone attached to the robot, pressing any key generates a “Dual Tone Multiple-Frequency” (DTMF) tone. The robot detects this tone through the attached phone, and the motor driver IC processes it to operate the motors, enabling the robot to move.
Latest Technology
The key technology in this project is DTMF, which generates distinct signals for 16 alphanumeric keys (0–9, A–D, *, #). The frequency range used is from 697 Hz to 1633 Hz. Each row and column of the keypad has a unique tone, allowing accurate detection of pressed keys.
Team Members
1. BHUPENDRA SINGH TOMAR | | 2. ANKIT MISHRA | 3. SHOBHIT JAIN
Project Guided By: Mr. IRSHAD AHAMAD
WIRELESS ELECTRONIC NOTICE BOARD
Project Structure
This project deals about an advanced hi-tech wireless notice board.This project is built around the AT89C51microcontroller from Atmel. Alphanumerical keypad is interfaced to the transmitter to type the data and transmit.This project uses regulated 5V,1Vpower supply,7805 three terminal voltage regulater is used for voltage regulation.Bridge type full rectifier is used to rectify the AC output of secondary of 230/12V step down transformer.
Latest Technology
The message can be transmitted to multi point receivers. After entering the text ,the user can disconnect the keyboard.At any time the user can add or remove or alter the text according to his requirement.
Team Members
1. ABHISHEK R.TIWARI | | 2. ANURAG TRIPATHI | 3. SOURABH SINGH RAJPOOT | GAURAV BHARGAV
Project Guided By: Prof. JITENDRA SINGH DODIYA
MOBILE CONTROLLED SPY ROBOT USING DTMF TECHNOLOGY
Project Structure
DTMF mobile ROBO is a machine that can be controlled with a mobile.In this project, the robot is controlled by a mobile phone that makes a call to the mobile phone attached to the robot. In the course of a call ,if any button is pressed,a tone corresponding to the button pressed is heard at the other end of the call. This tone is called ”Dual Tone Multiple-Frequency”(DTMF)tone.The robot perceives this DTMF tone with the help of the phone stacked on the robot. The receives tone is processed by the motor driver IC stop operate the motor& our robot starts moving.
Latest Technology
The latest technology used in this project is the use of DTMF.The DTMF technique outputs distinct representation of 16 common alphanumeric character(0-9,A-D,*,#)on the telephone. The lowest frequency used is 697HZ and the highest frequency used is 1633HZ. The DTMF keypad is arranged such that each row will have its own unique tone frequency and also each column will have its own unique tone frequency.
Team Members
1. ASHIMA AWASTHI | | 2. AMITA DHENGEKAR | 3. SHOBHIT JAIN | &nsbp; ANKITA PARDESI | &nsbp; SONAL GOUR
Project Guided By: Prof. ANAMIKA VERMA